Click To Call(904) 944-6930Click To Get A Free Estimate
Pale paver pool deck circling a screened pool, shown clean and evenly colored with oak trees behind the cage

Pool deck pavers with color and grip

Pool Deck Paver Sealing in Arlington, FL

Get a pool deck sealed for grip and color, with a free estimate at (904) 944-6930.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.75 to $3.25 a sq ft to clean, sand and seal
Call Now(904) 944-6930

Can I get my Arlington pool deck sealed, and how soon?

Yes, a local contractor seals pool deck pavers across Arlington, FL, and a request gets an answer within 1 business day, often within hours. The estimate is free and nobody pushes you to book. Start with a call to (904) 944-6930.

Think of the deck where the family spends August: color gone chalky, joints thin, and a green film where the cage keeps out the sun. Sealing sets that right and makes each splash and spill easier to rinse away. A contractor can tell you in one visit what the deck needs, so ask for your free estimate.

Call (904) 944-6930

Light colored paver deck beside a screened swimming pool, with a family relaxing under the cage

Is a sealed pool deck slippery when wet?

It does not have to be, but the choice of product decides it. A 2026 Duval County price guide says film-forming sealers can trap moisture and create slip hazards, so most pool decks in the county get a penetrating sealer that keeps traction when wet. If a gloss is chosen anyway, a paver company on the First Coast wants an anti-slip additive in it, since a glossy coat without one is slippery when wet. To ask which product is planned for your deck, call (904) 944-6930.

Unilock, a paver maker, says high-gloss sealers can turn slick when wet and calls matte the safer choice. That points to a low sheen for the strip along the water's edge and for steps. Bare feet make the difference. Say who uses the deck most when you ask for your free estimate.

Is it good to seal pavers in Florida, even around a pool?

The sun is the reason. A paver company on the First Coast says unsealed concrete pavers fade noticeably within 3 to 5 years, and that over 3 to 7 years an unsealed surface also shows sand-starved joints, mildew and stains. Wikipedia puts July's average high in the county near 91.9 degrees, so a deck with no shade takes that heat for months. To have the color checked, call (904) 944-6930.

Sun alone fades a deck, and a pool adds splash-out and chemicals on top. A Duval County exterior cleaning company lists both as concerns, and says a sealer suited to pool areas should not turn slippery when wet. A coat is not a one-time fix, so ask about the next one when you ask for your free estimate.

What do chlorine and salt do to a pool deck sealer?

They shorten its life. One paver company that serves the county gives about 18 to 24 months for decks with chlorine or salt systems, against 24 to 36 months for a shaded walkway with light foot traffic. A Duval County price guide says pool chemistry changes how often a deck has to be redone. Those are real numbers to plan around, and a quote that promises five years for a deck should get a question. To compare, call (904) 944-6930.

Arlington sits between the river and the Intracoastal Waterway, and the county gets about 52 inches of rain a year, so a deck is wet for much of the summer. Keep a note of the date the deck was done, then ask the contractor about timing when you ask for your free estimate.

How long does pool deck sealer last in Arlington?

Guides disagree a little, which is useful to know. Unilock says three to five years in general, a Duval County exterior cleaning company says intense sun cuts sealer life to 2.5 to 3 years, and another says two to three years for pavers in full sun with pool chlorine. A coastal paver company says film-forming coats run 3 to 5 years and penetrating ones 5 to 7. Taken together, plan on two to three years for an open, busy deck. To set a schedule, call (904) 944-6930.

A water test tells you more than a calendar. When water darkens the paver and soaks in within seconds instead of beading, protection is wearing thin. Washed-out color, sand blowing out of the joints and ants between them are other signs from the same company. Pour a cup on the deck each spring, and when it soaks in, ask for your free estimate.

Pricing

What does it cost to seal a pool deck in Arlington?

The published pool deck rate is $1.50 to $3.00 per square foot, from a 2026 Duval County price guide. The wider First Coast range for the whole clean, sand and seal job is $1.75 to $3.25, which an exterior cleaning company posts. A deck is often priced between the two. For a number tied to your deck, ask for your free estimate.

If old sealer has failed, it has to come off first, and that guide puts stripping at $0.75 to $1.50 per square foot. Sand lost from the joints costs $0.25 to $0.75 per square foot to refill. Bids far below these figures deserve a question about which steps are missing. To have a quote checked, call (904) 944-6930.

Pool deck sizeClean, sand and seal at $1.50 to $3.00If failed sealer is stripped first
400 sq ft$600 to $1,200$900 to $1,800
700 sq ft$1,050 to $2,100$1,575 to $3,150
1,000 sq ft$1,500 to $3,000$2,250 to $4,500

The first price column multiplies the $1.50 to $3.00 per square foot pool deck rate in a 2026 Duval County price guide. The last column adds that guide's $0.75 to $1.50 per square foot for stripping old sealer. The same guide totals a 500 to 1,000 square foot deck at $900 to $3,000. The contractor sets the final price after seeing the deck.

Get a Free Estimate

Pricing

Why does sealing a pool deck cost what it does?

Prep takes most of the time. The 2026 Duval County price guide says paver type, algae, efflorescence or oil stains, failed sealer and joint sand condition all move the price, and so does access: a locked gate, stairs, a tight side yard, several zones or plants close to the deck. Small projects cost more per square foot because prep does not shrink with the surface. To see how your deck lines up, ask for your free estimate.

One Arlington-area exterior cleaning company calls clean, re-sand and seal a restoration that can take two days. That is long compared with a spray-and-go quote. Ask how many days are planned and where the pool equipment is covered, then call (904) 944-6930.

Contractors with a spray wand and a pump sprayer on pavers beside a yellow stucco home, with a mossy oak overhead

What does a screen cage change about the deck?

Shade changes it most. Landscape Ontario says moss and algae should not grow on interlocking pavers unless the area is heavily shaded, and that shade keeps pavers damp and makes treatments work less well. A deck under cage framing, a lanai roof or an oak limb stays wetter than open concrete. Live oaks reach 60 to 80 feet tall with a spread of 60 to 120 feet, according to the University of Florida, so one in the next yard can shade a whole deck. To have the damp corners looked at, call (904) 944-6930.

Joints matter just as much. The same source says lost sand widens joints, lets soil in and brings weeds, and that sealing the joint sand is the strongest weed control. A contractor re-sands first, then seals, never the other way round. To book the order of work you want, ask for your free estimate.

Will the orange stains near my pool equipment come out?

Often they will, with the right treatment. The University of Florida says most Florida well water is high in iron and leaves orange streaks where it is sprayed. A Duval County exterior cleaning company says rust needs a rust treatment, not more pressure, and a driveway paver company pre-treats oil and rust spots before sealing, since the sealer locks in whatever is on the surface. Point out every orange patch near sprinkler heads when you ask for your free estimate.

Do I need HOA approval to seal a pool deck in Arlington?

Maybe, so read your papers. A local paver site says a sealer that keeps the natural look may count as routine upkeep, while color-enhancing or high-gloss finishes more often need approval. Florida statute 720.3035 limits an association to what its declaration or published guidelines state or reasonably imply, requires equal enforcement and says a denial must be in writing with the rule named. Ask a neighbor or the manager what has been approved before, then call (904) 944-6930.

How it works

What is the pool deck sealing process, step by step?

Six stages cover most decks, from the first walk-around to the last walk-through. Call (904) 944-6930 to put dates on them.

1. Walk the deck

The contractor measures, marks low spots and old sealer, and looks at how water drains toward the cage drains.

2. Cover and protect

Plants, pool equipment and the cage frame are shielded, because Unilock notes sealer cannot be washed off once it lands.

3. Wash gently

Western Interlock keeps pressure near 2000 PSI or less and uses a surface washer, and Unilock holds the nozzle about 12 inches off at a 30 degree angle.

4. Treat and dry

Algae, rust and oil get their own cleaners, then the deck dries for roughly 24 hours, longer in shade, before any sand or coat.

5. Re-sand and seal

Joints are filled and swept clean. Sealer is sprayed and back-rolled in one session with sprinklers off, in the 50 to 90 degree window.

6. Keep off it

Foot traffic is usually fine in 2 to 4 hours, according to a local company, and Unilock wants up to 48 hours of dry weather to cure.

What time of year works for sealing an Arlington pool deck?

Fall is the favorite, says an exterior cleaning company on the First Coast, since October and November are dry and oak pollen is gone. Spring is busy because of the pollen. Wikipedia lists May through September as the rainy stretch, with brief, heavy downpours, and November through April as the driest. A paver company that works the county says never to seal a damp surface or right before a forecast downpour. To pick a dry week, call (904) 944-6930.

Tool lifting old sand from between herringbone pavers on a pool deck before fresh sand goes in
Photos

What do sealed pool decks look like around Arlington?

Freshly sealed paver driveway under large oaks on a quiet street beside an Arlington pool cage
Sealed paver pool deck beside an Arlington pool cage
Sealed paver patio with a pergola beside the river beside an Arlington pool cage
Sealed paver walkway to a front door beside an Arlington pool cage
Close view of freshly sealed pavers beside an Arlington pool cage
Paver area with one cleaned half beside a dirty half beside an Arlington pool cage
Contractor cleaning pavers beside an Arlington pool cage
Contractor sealing or sanding pavers beside an Arlington pool cage
Questions

Questions about sealing a pool deck in Arlington

How much to seal a pool deck?

A 2026 Duval County price guide lists pool decks at $1.50 to $3.00 per square foot and totals a 500 to 1,000 square foot deck at $900 to $3,000. Stripping failed sealer adds $0.75 to $1.50 per square foot. A contractor measures first, so the number you get is for your own deck.

Is it good to seal pavers in Florida?

Around a pool, yes. A paver company that works the First Coast says unsealed concrete pavers fade noticeably in 3 to 5 years and compares sealer to sunscreen for the color. Sealed pavers also shed splashes and spills more easily, which helps a deck that stays wet.

How long do paver sealers last?

Most guides say three to five years on a drive or walk. Pool decks usually land on the short side. One Duval County paver company puts decks with chlorine or salt systems at about 18 to 24 months, so plan for that and check the surface each spring.

Why is paver sealing so expensive?

Because the sealer is the small part. A 2026 price guide points to prep, such as algae, stains, failed sealer and tired joint sand, and to access. Gates, stairs, tight side yards, several zones and plants near the deck all add time. Small decks cost more per foot for the same reason.

Will sealer make my pool deck slippery?

It can if the wrong one is chosen. A price guide warns that film-forming sealers can trap moisture and create slip hazards, so many decks get a penetrating type. Another paver company wants an anti-slip additive in any glossy product. Unilock says matte is the safer choice when wet.

Does chlorine or salt wear out pool deck sealer faster?

Sources point that way. A Duval County paver company lists pool decks with chlorine or salt systems at about 18 to 24 months between coats, shorter than shaded walkways at 24 to 36. A Duval County price guide adds that pool chemistry changes how often a deck is redone.

Can I swim right after the deck is sealed?

Ask the contractor before planning a swim. Local companies say foot traffic is often fine within 2 to 4 hours, and Unilock wants up to 48 hours of dry weather for the coat to cure, with sprinklers off. The product label and that day's weather set the real answer.

Does my HOA have to approve a sealed pool deck?

Sometimes. A local paver site says a natural look may count as upkeep, while a high-gloss or color-enhancing finish more often needs approval. Under Florida statute 720.3035, a homeowners association can only enforce what its declaration or published guidelines state or reasonably imply. Read those papers first.

Pool deck looking dull? Get a free estimate

Pick up the phone or fill in the form, and a local contractor writes back inside 1 business day, often within hours.

Call (904) 944-6930

Free, no obligation